Earthing and Lighting Protection System

These are suitable for bonding copper cable or wire to steel structures.

• Backed by a rich industrial experience, we are engaged in offering a commendable array of Earth Rod Clamp.

• Delivery Time: 1week

We are the biggest and largest Manufacturers and Suppliers of Flexible Copper Braid. It is suitable for Earth Bonding. It can be supplied as Standard Drilled Pre-Cut Bonds. Braids made of many copper wires are also sometimes used for flexible electrical connections between large components. The numerous smaller wires comprising the braid are much more resistant to breaking under repeated motion and vibration that is a cable of larger wires. In electrical and electronic cables, a braid is a tubular sheath made of braided strands of metal placed around a central cable for shielding against electromagnetic interference. The braid is grounded while the central conductor or conductors carry the signal.

Customer specific sizes types of braid can be manufactured on order.

Packaging TypeBoxUsage
/ApplicationEarthing
Brand safe power
MaterialBrass,Gunmetal
Country of OriginMade in IndiaRod Diameter3/8" / 9/5

Material - Gunmetal / Brass / Aluminum
Used for supporting lightning conductor Air Terminals.

Fostered with enormous business understanding of this realm, we are involved in presenting a broad consignment of Aerial Rod, Multiple Point & Terminal Base.

Material
PLATE - Gunmetal / Brass
U BOLT - Copper / Copper Alloy / Stainless Steel

 U Bolt - Rod To Cable Clamp - GUV are used for Connecting Rod to Cable. Available with different Rod & Cable size.

Nominal Rod Dia.Conductor Range - mm²Product Code5/8 / 1616 - 95AURC - 13/4 / 2016 - 70AURC - 25/8 / 1670 - 185AURC - 35/8 / 2070 - 150AURC - 4 

• Delivery Time: 1 WEEK

SAFE POWER  Branded Earth Bars For Housing are made of hard drawn copper. They are used for fitting into slots provided in the earth housings where multiple connections are required to the Earth Rod.

These Copper Lattice Ground Mat / Earth Mat are renowned for high durability, tensile strength, corrosion resistance and high performance. We provide an engineered range of Earth Mats i.e. Lattice Copper which is available in various standards and is manufactured using high quality of copper which is of excellent tensile strength. These Earth plates / Ground plates are used for protection against lightning.

A wide range of Earth Mats - Lattice Copper that we offer is available in various specifications for several kinds of electrical fitting works as to avoid lightning. We offer these Earth Plates or Ground plates as per the requirement and specification of our clients.

We are the Largest Manufacturer, Exporters and Suppliers of Copper Bonded Plate.

These are mainly made of Aluminum, Aluminum Alloy and Aluminum-Steel cables, these are replacing hard copper line cables since the last century. These cables are formed by several aluminum wires in concentric layers wired in opposite directions.

Branded U Bolt - Rod To Cable Clamp - GUV are used for Connecting Rod to Cable. Available with different Rod & Cable size.

Nominal Rod Dia.Conductor Range - mm²Product Code5/8 / 1616 - 95AURC - 13/4 / 2016 - 70AURC - 25/8 / 1670 - 185AURC - 35/8 / 2070 - 150AURC - 4

. Standard type
. Material - E - Copper
. Finish - Copper / Tin Plated

These are used for 4 way Copper Tape Connection.Recommended fixing-countersunk woodscrew 1 1/2"x no.1 0 and wall plug.

Copper Alloy Clamps are made from Bronze / Gunmetal / High Strength Copper Alloy body which gives strong resistance to corrossion.

copper bonded earth rod are made from low carbon Steel. Earth Rods are molecularly bonded with 99.9% pure electrolytic copper.

Branded Earth Bars For Housing are made of hard drawn copper. They are used for fitting into slots provided in the earth housings where multiple connections are required to the Earth Rod.

Material - Copper
Finishing - Copper / Tinned

Features:
- Higher precision
- Very effective for holding
- Excellent tensile strength material

Branded Earth Bars For Housing are made of hard drawn copper. They are used for fitting into slots provided in the earth housings where multiple connections are required to the Earth Rod.

olid copper earth rod are made from 99.9% pure electrolytic copper. Solid Copper rods offer greater resistance to corrosion. They are ideally used in applications where soil conditions are very aggressive. for eg. soil with high salt content.

Oblong Test Clamps are used with bare copper tape conductor. Suitable for straight through Tape Joint.

Driving Studs are used to drive the Earth Rod to the Ground. Re-usable many times. Suitable for Power Hammering.

Material - Electrolytic Copper

Material - Electrolytic Copper

Material - Electrolytic Copper

Material - Copper / Brass / Aluminum
These are used with Bare Copper Tape. Used to support Tape to structure.

HDG Steel Cross Clamp equipped with 4 Galvanised Screws & Nuts M8 x 25, suitable to connect-
A) 8 mm or 10 mm Round Bars
B) Galvanised Plates with maximum width of 30 mm.

An education resource on the properties and applications of copper for KS3 and KS4. ... Copper has the best electrical conductivity of any metal, except silver. A good electrical ... The alloys are harder, stronger and tougher than pure copper.

Concrete Earth Pit is suitable for most types of Earthing & Lightning Protection installations. The Pit can have an internal Earth Bar (5 Hole or & 7 Hole) fitted diagonally across in slots provided for multiple connections.

Material - Electrolytic Copper / Aluminum
Air Rod can be installed with or without Multiple Point.

Material - High conductivity Copper Bar
* Lengths as per clients request.
* Tinned Copper Bus Bar also available.
* Add suffix T to the product code for Tinned Copper Bus Bar.

Conductor Size25 X 3Tape,
Width20-40 mmTape
Length40-50 m
MaterialAluminum
Brand safe power industries
Country of OriginMade in India

Material - Gunmetal / Brass
These are suitable for 4 Way Connections, Straight, Through or Tee Joints for Copper Tape.

brass coupler : Material : Brass or Gun MetalApplication : Counter bore for protecting the rod threads from damage & corrosion

Material - Gunmetal / BrassThese are used with 8 mm conductor or for supporting Air Terminals when used in conjuction with wall mounted Air Terminal base.

Fostered with enormous business understanding of this realm, we are involved in presenting a broad consignment of Aerial Rod, Multiple Point & Terminal Base.

Mechanically copper claded grounding rod is made when electrolytic grade 99.9% copper tube with wall thickness of 0.25 (250 microns) is claded to a low carbon steel rod. Even if the rod is bent by 450, the copper tube should not peel out of the Steel rod